TOPSELLER
- SKU: 54017Inert gas welding machine EUROMIG plus 2540,5 - 10 mm 0,6 - 1,2 mm 15,25 - 26,5 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 130 A 25 - 250 A Show more
Specifications
Material thickness 0,5 - 10 mm steel / stainless steel wire diameter 0,6 - 1,2 mm welding voltage adjustment 15,25 - 26,5 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg duty cycle 130 A welding current setting 25 - 250 A welding current switching stages 10 Num. ground connection plug / cross-section 9 / 25 O / mm2 welding power source (10 min at 40 °C) at welding current 20 / 250 % / A holding capacity max 16 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 2 Rollers connector CEE 16 A Width 440 mm Depth 750 mm Height 640 mm Weight 75 kg € 1.762,80Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 1.762,80 Incl. Tax€ 1.469,00 Excl. TaxNormal-Price
Incl. Tax: € 2.316,00 -24%In stock, immediately available - SKU: 54008Shielding gas welding system PROFI-MIG 3000 plus / MIG 3040,5 - 12 mm 0,6 - 1,2 mm 15,5 - 29 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 30 - 300 A 2 x 10 Num. Show more
Specifications
Material thickness 0,5 - 12 mm steel / stainless steel wire diameter 0,6 - 1,2 mm welding voltage adjustment 15,5 - 29 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg welding current setting 30 - 300 A welding current switching stages 2 x 10 Num. ground connection plug / cross-section 13 / 50 O / mm2 welding power source (10 min. at 40 °C) at welding current 165 A welding power source (10 min at 40 °C) at welding current 30 / 300 % / A holding capacity max 20,2 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 4 Rollers connector CEE 16 A Width 540 mm Depth 850 mm Height 780 mm Weight 95 kg € 2.398,80Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 2.398,80 Incl. Tax€ 1.999,00 Excl. TaxNormal-Price
Incl. Tax: € 2.976,00 -19%In stock, immediately available - SKU: 33300Hand pallet truck 'HW 2500'2500 kg 540 mm 1150 mm 80 mm 200 mm 75 kg Show more
Specifications
Lifting capacity 2500 kg Fork width 540 mm Fork length 1150 mm 80 mm Max. stroke height 200 mm Weight 75 kg € 430,80Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 430,80 Incl. Tax€ 359,00 Excl. TaxNormal-Price
Incl. Tax: € 478,80 -10%In stock, immediately available - SKU: 82005Gear Column Drill GBM 3/25 SNE - set25 mm M16 MK 3 105 - 2900 rpm 8 120 mm 100 mm 14 mm Show more
Specifications
drilling capacity in steel 25 mm thread cutting performance M16 mandrel holding fixture (screw mandrel) MK 3 speed range 105 - 2900 rpm speed gradually 8 quill stroke 120 mm column diameter 100 mm t-slot width 14 mm drill head lift 580 mm drill table lift 530 mm mandrel radius 255 mm drill table revolving ± 180 ° drill head revolving ± 180 ° quill distance table min./max. 0 - 840 mm drilling table surface 500x350 mm motor power (2-stage) 900/650 W voltage 400/50 V/Hz cubature 500x350x840 mm base plate surface 400x500 mm Weight 180 kg € 3.564,00Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 3.564,00 Incl. Tax€ 2.970,00 Excl. TaxNormal-Price
Incl. Tax: € 4.182,00 -15%In stock, immediately available - SKU: 00753SEDSS 183WDE-AVR-DSE4520-V2 generator400 / 230/50 V/Hz 18 kVA 17 kVA 25 A 6.8 kVA 6.2 kVA 27 A Diesel Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 18 kVA continuous power 3~400V 17 kVA power 3~400V continuous 25 A maximum power 1~230V 6.8 kVA continuous power 1 ~ 230V 6.2 kVA Power 1 ~ 230V continuous 27 A fuel Diesel rotational 3000 rpm cooling water-cooled engine type Kubota D1105 emission level 5 engine power 19 kW capacity 1123 cm3 cylinder 3 tank capacity 63 l consumption at 75% load 3.9 l/h Running time per tank filling at 75% load 16.2 h dimensions lxbxh 1500x640x1000 mm weight (without fuel) 450 kg sound power complies with RL 2000/14/EG, 2005/88/EG 96 LWA sound pressure level in 7m 71 dB(A) € 19.440,00Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 19.440,00 Incl. Tax€ 16.200,00 Excl. TaxNormal-Price
Incl. Tax: € 21.588,00 -10%In stock, immediately available - SKU: 88150Universal lathe PROFI 914/150 N incl. 3-axis position display914 mm 150 mm 300 mm 178 mm 430 mm 180 mm 225 mm 175 mm Show more
Specifications
Tip width 914 mm Tip height 150 mm turning diameter over bed 300 mm turning diameter over carriage 178 mm turning diameter without bridge 430 mm machine bed width 180 mm bridge length 225 mm cross slide way 175 mm top slide way 95 mm turning chisel cross-section, max. 16x16 mm rotating feed intake D1 - 4 mandrel holding fixture (screw mandrel) MK 5 mm spindle bore 38 mm rotational speed 65 - 1810 rpm speed gradually 18 longitudinal feed (16) 0,078-1,044 mm/rev cross feed rates (16) 0,018 - 0,236 mm/rev Thread size metric (M..) (36) 0.45 - 10 mm inch thread, gears G (20) 2 1/4 - 40 G/' lead screw gradient 3 mm lead screw diamteter 22 mm sleeve holding fixture MK 3 quill diameter 32 mm spindle stroke 100 mm motor power 1100 W voltage 400/50 V/Hz length (total) 1700 mm width (total) 750 mm height (total) 1270 mm Weight 420 kg € 11.052,00Special price because of Trade News 2024 (until 31. December 2024)€ 11.052,00 Incl. Tax€ 9.210,00 Excl. TaxResidual amounts available - SKU: 00752SEDSS 133WDE-AVR-DSE4520-V2 generator400 / 230/50 V/Hz 13.5 kVA 12 kVA 17 A 5 kVA 4.6 kVA 20 A Diesel Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 13.5 kVA continuous power 3~400V 12 kVA power 3~400V continuous 17 A maximum power 1~230V 5 kVA continuous power 1 ~ 230V 4.6 kVA Power 1 ~ 230V continuous 20 A fuel Diesel rotational 3000 rpm cooling water-cooled engine type Kubota D902 emission level 5 engine power 15 kW capacity 898 cm3 cylinder 3 tank capacity 58 l consumption at 75% load 3.3 l/h Running time per tank filling at 75% load 17.6 h dimensions lxbxh 1380x640x880 mm weight (without fuel) 360 kg sound power complies with RL 2000/14/EG, 2005/88/EG 96 LWA sound pressure level in 7m 71 dB(A) € 17.700,00Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 17.700,00 Incl. Tax€ 14.750,00 Excl. TaxNormal-Price
Incl. Tax: € 19.674,00 -10%Residual amounts available - SKU: 81350Hydraulic plate shears HGS-A 3100x6 mm3100 mm 6 mm 4 mm 0.05 - 0.8 mm 20 1/min 14 Num. 12 t 11 kW Show more
Specifications
Cut length 3100 mm cutting capacity 42 kg/mm² 6 mm cutting capacity 70 kg/mm² 4 mm kerf min. / max. 0.05 - 0.8 mm Stroke rate 20 1/min downholder 14 Num. downholder pressure 12 t main drive engine power 11 kW backgauge engine power 0.75 kW backgauge adjustment 1000 mm adjusting speed 110 mm/s Cutting angle 1.2 ° Desk length 3400 mm support arms 2 Num. width without support arms 2410 mm transport width 2100 mm Desk height 800 mm oil tank volume 150 l Length 4000 mm Width 3010 mm Height 1640 mm Weight 5500 kg € 0,00In stock, immediately available - SKU: 52407Stromerzeuger SEDSS 150WDE-ECO-Stage 3A*400 / 230/50 V/Hz 165 kVA 150 kVA 216 A 60 kVA 55 kVA 216 A Diesel Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 165 kVA continuous power 3~400V 150 kVA power 3~400V continuous 216 A maximum power 1~230V 60 kVA continuous power 1 ~ 230V 55 kVA Power 1 ~ 230V continuous 216 A fuel Diesel rotational 1500 rpm cooling water-cooled engine type FPT N67TE1PV emission level 3A engine power 165 kW capacity 6700 cm3 cylinder 6 tank capacity 310 l consumption at 75% load 29.5 l/h Running time per tank filling at 75% load 10.5 h dimensions lxbxh 3300x1100x1970 mm weight (without fuel) 1900 kg sound power complies with RL 2000/14/EG, 2005/88/EG 93 LWA sound pressure level in 7m 68 dB(A) € 0,00In stock, immediately available - SKU: 78933BOMAR metal band saw Individual 620.460 DGH620x460 mm 6100 mm 41 mm 1.3 mm 60-0-60 ° continuously variable 20 - 120 m/min 4000 W Show more
Specifications
cutting range max. 620x460 mm Saw band length 6100 mm saw band height 41 mm Saw band width 1.3 mm Cutting angle 60-0-60 ° speed gradually continuously variable cutting rage 1/2 20 - 120 m/min saw blade drive engine power 4000 W voltage 400/50 V/Hz infeed height 770 mm remnant piece length 20 mm Length 3000 mm Width 1850 mm Height 2350 mm Weight 1800 kg € 44.610,00€ 44.610,00 Incl. Tax€ 37.175,00 Excl. TaxIn stock, immediately available - SKU: 88178Universal lathe INDUSTRIE 2000/250 HD2000 mm 250 mm 500 mm 310 mm 720 mm 405 mm 200 mm 340 mm Show more
Specifications
Tip width 2000 mm Tip height 250 mm turning diameter over bed 500 mm turning diameter over carriage 310 mm turning diameter without bridge 720 mm machine bed width 405 mm bridge length 200 mm cross slide way 340 mm top slide way 145 mm turning chisel cross-section, max. 25x25 mm rotating feed intake D1 - 8 mandrel holding fixture (screw mandrel) MK 7 mm spindle bore 80 mm rotational speed 9 - 1600 rpm speed gradually 24 longitudinal feed (80) 0.063 - 2.52 mm/rev cross feed rates (80) 0.027 - 1.07 mm/rev Thread size metric (M..) (46) 1 - 224 mm module thread metric (42) 0.5 - 112 mm inch thread, gears G (46) 1/8 - 28 G/' inch module thread, Gears G (45) 1/4 - 56 G/' rapid traverse along / across 4.5 / 1.9 m/min lead screw gradient 12 mm lead screw diamteter 40 mm sleeve holding fixture MK 5 quill diameter 75 mm spindle stroke 150 mm motor power 7500 W rapid traverse motor 370 W coolant pump 40 W voltage 400/50 V/Hz length (total) 3500 mm width (total) 900 mm height (total) 1259 mm Weight 3250 kg € 44.532,00Special price because of Trade News 2024 (until 31. December 2024)€ 44.532,00 Incl. Tax€ 37.110,00 Excl. TaxResidual amounts available - SKU: 00769SEDSS 44WDE-AVR-DSE4520-V3 generator€ 34.878,00€ 34.878,00 Incl. Tax€ 29.065,00 Excl. TaxIn stock, immediately available
- SKU: 00721SEDSS 183WDE-IT/TN - Stage 5 generator400 / 230/50 V/Hz 18 kVA 17 kVA 25 A 6.8 kVA 6.2 kVA 27 A Diesel Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 18 kVA continuous power 3~400V 17 kVA power 3~400V continuous 25 A maximum power 1~230V 6.8 kVA continuous power 1 ~ 230V 6.2 kVA Power 1 ~ 230V continuous 27 A fuel Diesel rotational 1500 rpm cooling water-cooled engine type D1105 emission level 5 engine power 19 kW capacity 1123 cm3 cylinder 3 tank capacity 63 l consumption at 75% load 3.9 l/h Running time per tank filling at 75% load 16.2 h dimensions lxbxh 1500x640x900 mm weight (without fuel) 450 kg sound power complies with RL 2000/14/EG, 2005/88/EG 96 LWA sound pressure level in 7m 71 dB(A) € 0,00In stock, immediately available - SKU: 53199Electricity generator SEB 16000WDE-AVR400 / 230/50 V/Hz 16 kVA 14.4 kVA 21 A 5.8 kVA 5.3 kVA 23 A Petrol Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 16 kVA continuous power 3~400V 14.4 kVA power 3~400V continuous 21 A maximum power 1~230V 5.8 kVA continuous power 1 ~ 230V 5.3 kVA Power 1 ~ 230V continuous 23 A fuel Petrol rotational 3000 rpm cooling air-cooled engine type Honda GX 690 emission level 5 engine power 15 kW capacity 688 cm3 cylinder 2 tank capacity 20 l consumption at 75% load 5 l/h Running time per tank filling at 75% load 4 h dimensions lxbxh 1020x550x600 mm weight (without fuel) 154 kg sound pressure level in 7m 75 dB(A) € 4.920,00Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 4.920,00 Incl. Tax€ 4.100,00 Excl. TaxNormal-Price
Incl. Tax: € 6.684,00 -26%In stock, immediately available - SKU: 00778SEDSS 34WDE-AVR-DSE4520-V4 generator€ 34.038,00€ 34.038,00 Incl. Tax€ 28.365,00 Excl. TaxIn stock, immediately available
- SKU: 82101Gear milling and drilling machine MFB 45 SGV45 mm M20 80 mm 32 mm MK 4 75 - 1600 rpm 150 - 3200 rpm 12 Show more
Specifications
drilling capacity in steel 45 mm thread cutting performance M20 face mills milling capacity 80 mm end mills milling capacity 32 mm mandrel holding fixture (screw mandrel) MK 4 rotational speed 1 75 - 1600 rpm rotational speed 2 150 - 3200 rpm speed gradually 12 quill stroke 120 mm column diameter 115 mm t-slot width 14 mm milling head stroke 440 mm mandrel radius 270 mm milling head swivel range ± 90 ° quill distance table min./max. 0 - 790 mm quill distance socket 1280 mm quill feed 0,10/0,18/0,28 mm/rev router table surface 730x210 mm table length X x Y 375 x 200 mm router table stroke 515 mm quill feed levels 3 motor power (2-stage) 1100 / 850 W coolant pump 40 W voltage 400/50 V/Hz cubature 730x210x790 mm length x width 1115 x 1100 mm Height 2110 mm Weight 350 kg € 5.928,00€ 5.928,00 Incl. Tax€ 4.940,00 Excl. TaxResidual amounts available - SKU: 78900BOMAR metal band saw EasyCut 275.230 DG275x230 mm 2720 mm 27 mm 0.9 mm 45-0-60 ° 2 40/80 m/min 1100 /1500 W Show more
Specifications
cutting range max. 275x230 mm Saw band length 2720 mm saw band height 27 mm Saw band width 0.9 mm Cutting angle 45-0-60 ° speed gradually 2 cutting rage 1/2 40/80 m/min saw blade drive engine power 1100 /1500 W voltage 400/50 V/Hz infeed height 978 mm remnant piece length 20 mm Length 1588 mm Width 1150 mm Height 1477 mm Weight 370 kg € 6.180,00€ 6.180,00 Incl. Tax€ 5.150,00 Excl. TaxIn stock, immediately available - SKU: 11022Compressor PROFI-LINE PL 840/10/200 D595 l/min 850 l/min 10 bar 200 l mobile 5,5 / 7,5 kW / HP 400/50 V/Hz 76 dB(A) Show more
Specifications
Effective delivery amount 595 l/min Delivery quantity according to VDMA 4362, measured at 80% of the maximum pressure Yes Suction power 850 l/min Max. operation pressure 10 bar Oil lubricated Yes Container volume 200 l model mobile Motor nominal power 5,5 / 7,5 kW / HP electrical connection voltage / frequency 400/50 V/Hz Sound pressure level (4 m) 76 dB(A) rotational speed compressor 1150 rpm Air outflow 2-Jan inches Length 1550 mm Width 650 mm Height 1250 mm Weight 160 kg € 2.698,80Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 2.698,80 Incl. Tax€ 2.249,00 Excl. TaxNormal-Price
Incl. Tax: € 3.120,00 -14%Residual amounts available - SKU: 00799SEDSS 44WDE-AVR-DSE7420-V6 power generator€ 41.658,00€ 41.658,00 Incl. Tax€ 34.715,00 Excl. TaxIn stock, immediately available
- SKU: 54016Inert gas welding machine EUROMIG plus 2040,5 - 8 mm 0,6 - 1,0 mm 14,8 - 24 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 100 A 15 - 200 A Show more
Specifications
Material thickness 0,5 - 8 mm steel / stainless steel wire diameter 0,6 - 1,0 mm welding voltage adjustment 14,8 - 24 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg duty cycle 100 A welding current setting 15 - 200 A welding current switching stages 10 Num. ground connection plug / cross-section 9 / 25 O / mm2 welding power source (10 min at 40 °C) at welding current 20 / 200 % / A holding capacity max 12 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 2 Rollers connector CEE 16 A Width 440 mm Depth 750 mm Height 640 mm Weight 70 kg € 1.558,80Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 1.558,80 Incl. Tax€ 1.299,00 Excl. TaxNormal-Price
Incl. Tax: € 1.902,00 -18%In stock, immediately available
We stand for quality, reliability and stability - values that are in demand today more than ever.
FOCUSED
Powered by Quality
In the race for innovation, it sometimes happens that one loses sight of what and for whom one is looking for new solutions. The end result is the realisation that product development in itself is not a recipe for success.
It is much more important to keep your ear close to the needs and wishes of the customer. Only in this way can new developments and special solutions be created that really bring new advantages.
ELMAG works and develops based on this principle: always exactly according to the customer's wishes - and still with a wide standard range for trade, industry and crafts.
Only those who are prepared to go one step further reach the top. For this reason, the 2- or 3-year warranty and the 15-year spare parts guarantee are a matter of course at ELMAG.
MAIN PRINCIPLE
Powered by People
A large part of the ELMAG team has already completed their apprenticeship. This creates an invaluable advantage both for building up
expertise as well as for continuity in customer care. Only over the years can genuine trust and intensive partnership develop.
The human and professional appreciation of all employees is lived at ELMAG on a daily basis - and consistently. Respectful cooperation ensures a collegial, positive working atmosphere and more motivation at the workplace - for everyone. This is also felt by the customers.
POWERED BY QUALITY - POWERED BY PEOPLE. This guiding principle is a top priority for the entire ELMAG team.