TOPSELLER
- SKU: 54017Inert gas welding machine EUROMIG plus 2540,5 - 10 mm 0,6 - 1,2 mm 15,25 - 26,5 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 130 A 25 - 250 A Show more
Specifications
Material thickness 0,5 - 10 mm steel / stainless steel wire diameter 0,6 - 1,2 mm welding voltage adjustment 15,25 - 26,5 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg duty cycle 130 A welding current setting 25 - 250 A welding current switching stages 10 Num. ground connection plug / cross-section 9 / 25 O / mm2 welding power source (10 min at 40 °C) at welding current 20 / 250 % / A holding capacity max 16 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 2 Rollers connector CEE 16 A Width 440 mm Depth 750 mm Height 640 mm Weight 75 kg € 1.762,80Special price because of Messe Highlights Schweissen & Intertool 2024 (until 30. June 2024)€ 1.762,80 Incl. Tax€ 1.469,00 Excl. TaxNormal-Price
Incl. Tax: € 2.316,00 -24%In stock, immediately available - SKU: 53199Electricity generator SEB 16000WDE-AVR400 / 230/50 V/Hz 16 kVA 14.4 kVA 21 A 5.8 kVA 5.3 kVA 23 A Petrol Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 16 kVA continuous power 3~400V 14.4 kVA power 3~400V continuous 21 A maximum power 1~230V 5.8 kVA continuous power 1 ~ 230V 5.3 kVA Power 1 ~ 230V continuous 23 A fuel Petrol rotational 3000 rpm cooling air-cooled engine type Honda GX 690 emission level 5 engine power 15 kW capacity 688 cm3 cylinder 2 tank capacity 20 l consumption at 75% load 5 l/h Running time per tank filling at 75% load 4 h dimensions lxbxh 1020x550x600 mm weight (without fuel) 154 kg sound pressure level in 7m 75 dB(A) € 4.920,00Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 4.920,00 Incl. Tax€ 4.100,00 Excl. TaxNormal-Price
Incl. Tax: € 6.684,00 -26%In stock, immediately available - SKU: 10031Compressor MEISTER 610/10/100 D390 l/min 553 l/min 10 bar 100 l Electric motor mobile 3 / 4 kW / HP 400/50 V/Hz Show more
Specifications
Effective delivery amount 390 l/min Delivery quantity according to VDMA 4362, measured at 80% of the maximum pressure Yes Suction power 553 l/min Max. operation pressure 10 bar Oil lubricated Yes Container volume 100 l type Electric motor model mobile Motor nominal power 3 / 4 kW / HP electrical connection voltage / frequency 400/50 V/Hz Sound pressure level (4 m) 74 dB(A) rotational speed compressor 1300 rpm Length 1130 mm Width 530 mm Height 910 mm Weight 86 kg € 1.464,00Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 1.464,00 Incl. Tax€ 1.220,00 Excl. TaxNormal-Price
Incl. Tax: € 1.596,00 -8%In stock, immediately available - SKU: 33300Hand pallet truck 'HW 2500'2500 kg 540 mm 1150 mm 80 mm 200 mm 75 kg Show more
Specifications
Lifting capacity 2500 kg Fork width 540 mm Fork length 1150 mm 80 mm Max. stroke height 200 mm Weight 75 kg € 430,80Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 430,80 Incl. Tax€ 359,00 Excl. TaxNormal-Price
Incl. Tax: € 478,80 -10%In stock, immediately available - SKU: 54008Shielding gas welding system PROFI-MIG 3000 plus / MIG 3040,5 - 12 mm 0,6 - 1,2 mm 15,5 - 29 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 30 - 300 A 2 x 10 Num. Show more
Specifications
Material thickness 0,5 - 12 mm steel / stainless steel wire diameter 0,6 - 1,2 mm welding voltage adjustment 15,5 - 29 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg welding current setting 30 - 300 A welding current switching stages 2 x 10 Num. ground connection plug / cross-section 13 / 50 O / mm2 welding power source (10 min. at 40 °C) at welding current 165 A welding power source (10 min at 40 °C) at welding current 30 / 300 % / A holding capacity max 20,2 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 4 Rollers connector CEE 16 A Width 540 mm Depth 850 mm Height 780 mm Weight 95 kg € 2.398,80Special price because of Messe Highlights Schweissen & Intertool 2024 (until 30. June 2024)€ 2.398,80 Incl. Tax€ 1.999,00 Excl. TaxNormal-Price
Incl. Tax: € 2.976,00 -19%In stock, immediately available - SKU: 82005Gear Column Drill GBM 3/25 SNE - set25 mm M16 MK 3 105 - 2900 rpm 8 120 mm 100 mm 14 mm Show more
Specifications
drilling capacity in steel 25 mm thread cutting performance M16 mandrel holding fixture (screw mandrel) MK 3 speed range 105 - 2900 rpm speed gradually 8 quill stroke 120 mm column diameter 100 mm t-slot width 14 mm drill head lift 580 mm drill table lift 530 mm mandrel radius 255 mm drill table revolving ± 180 ° drill head revolving ± 180 ° quill distance table min./max. 0 - 840 mm drilling table surface 500x350 mm motor power (2-stage) 900/650 W voltage 400/50 V/Hz cubature 500x350x840 mm base plate surface 400x500 mm Weight 180 kg € 3.564,00Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 3.564,00 Incl. Tax€ 2.970,00 Excl. TaxNormal-Price
Incl. Tax: € 4.182,00 -15%In stock, immediately available - SKU: 88155Universal lathe INDUSTRIE 1000/2501000 mm 250 mm 500 mm 325 mm 630 mm 330 mm 260 mm 300 mm Show more
Specifications
Tip width 1000 mm Tip height 250 mm turning diameter over bed 500 mm turning diameter over carriage 325 mm turning diameter without bridge 630 mm machine bed width 330 mm bridge length 260 mm cross slide way 300 mm top slide way 130 mm turning chisel cross-section, max. 25x25 mm rotating feed intake D1 - 6 mandrel holding fixture (screw mandrel) MK 5 mm spindle bore 65 mm rotational speed 22 - 1800 rpm speed gradually 15 longitudinal feed (66) 0,072 - 4,038 mm/rev cross feed rates (66) 0,036 - 2,019 mm/rev Thread size metric (M..) (66) 0.5 - 2.8 mm module thread metric (33) 0.5 - 3.5 mm inch thread, gears G (66) 1 - 56 G/' inch module thread, Gears G (33) 8 - 56 G/' lead screw gradient 6 mm lead screw diamteter 35 mm sleeve holding fixture MK 5 quill diameter 65 mm spindle stroke 120 mm motor power 5500 W rapid traverse drive 120 W coolant pump 125 W voltage 400/50 V/Hz length (total) 2450 mm width (total) 1150 mm height (total) 1800 mm Weight 1600 kg € 27.348,00Special price because of Trade News 2024 (until 31. December 2024)€ 27.348,00 Incl. Tax€ 22.790,00 Excl. TaxResidual amounts available - SKU: 81350Hydraulic plate shears HGS-A 3100x6 mm3100 mm 6 mm 4 mm 0.05 - 0.8 mm 20 1/min 14 Num. 12 t 11 kW Show more
Specifications
Cut length 3100 mm cutting capacity 42 kg/mm² 6 mm cutting capacity 70 kg/mm² 4 mm kerf min. / max. 0.05 - 0.8 mm Stroke rate 20 1/min downholder 14 Num. downholder pressure 12 t main drive engine power 11 kW backgauge engine power 0.75 kW backgauge adjustment 1000 mm adjusting speed 110 mm/s Cutting angle 1.2 ° Desk length 3400 mm support arms 2 Num. width without support arms 2410 mm transport width 2100 mm Desk height 800 mm oil tank volume 150 l Length 4000 mm Width 3010 mm Height 1640 mm Weight 5500 kg € 0,00In stock, immediately available - SKU: 11603MARK screw compressor MSM 5.5 D-270 AD 2000780 l/min 10 bar 66 dB(A) 5,5 / 7,5 kW / HP 400/50 V/Hz 1/2 inches 1540 mm 600 mm Show more
Specifications
Effective delivery amount 780 l/min Max. operation pressure 10 bar 66 dB(A) Motor nominal power 5,5 / 7,5 kW / HP electrical connection voltage / frequency 400/50 V/Hz Air outflow 1/2 inches Length 1540 mm Width 600 mm Height 1350 mm Weight 225 kg € 6.178,80Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 6.178,80 Incl. Tax€ 5.149,00 Excl. TaxNormal-Price
Incl. Tax: € 6.642,00 -7%Residual amounts available - SKU: 42166Automatic hose reel ROLL AIR PROFI 15polyurethane 8 x 12 mm 15 m 2 m 15 bar 5.5 kg Plastic Show more
Specifications
hose quality polyurethane hose-Ø inside x outside 8 x 12 mm hose length 15 m hose length supply 2 m Max. working pressure 15 bar locking device defeatable Yes slow Motion suitable (optional) Yes Weight 5.5 kg Construction Plastic With gland Yes € 298,80€ 298,80 Incl. Tax€ 249,00 Excl. TaxIn stock, immediately available - SKU: 42293Automatic hose reel EUROREEL AIR 10/15Hybrid polymer 10 x 15 mm 15 m 0.9 m 15 bar 400x200x380 mm 13.2 kg Show more
Specifications
hose quality Hybrid polymer hose-Ø inside x outside 10 x 15 mm hose length 15 m hose length supply 0.9 m Max. working pressure 15 bar Dimensions 400x200x380 mm Weight 13.2 kg € 166,80Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 166,80 Incl. Tax€ 139,00 Excl. TaxNormal-Price
Incl. Tax: € 204,00 -18%In stock, immediately available - SKU: 00769SEDSS 44WDE-AVR-DSE4520-V3 generator€ 34.878,00€ 34.878,00 Incl. Tax€ 29.065,00 Excl. TaxIn stock, immediately available
- SKU: 83153Hydraulic profile steel shear and hole punch SPS 6565 t 2 Num. 5 Num. 26 x 20 O mm 57 x 10 O mm 110 x 3 O mm 55 mm 25 1/min Show more
Specifications
hydraulic pressure force 65 t hydraulic pistons 2 Num. processing stations 5 Num. punching-6 x material thickness max. 26 x 20 O mm punching-6 x material thickness 57 x 10 O mm punching-6 x material thickness max. 110 x 3 O mm punching stroke 55 mm strokes at 20 mm stroke max. 25 1/min Overhang length 505 mm punching station working height 1005 mm round steel cross-section max. 45 O mm square steel cross-section max. 45 x 45 mm angle steel cutting angle 90° 130x130x13 mm angle steel cutting angle 45° 70x70x7 mm profile steel station working height 1130 mm flat steel thickness max. 300x20 mm flat steel width max. 375x15 mm flat steel knife length 380 mm scissors with angle 100 x 10 mm flat steel station working height 895 mm klink thickness max. 10 mm notching width 45 mm notching depth 100 mm notching working height 895 mm motor power 5500 W voltage 400/50 V/Hz Length 1905 mm Width 770 mm Height 1765 mm Weight 2100 kg € 21.276,00€ 21.276,00 Incl. Tax€ 17.730,00 Excl. TaxResidual amounts available - SKU: 54016Inert gas welding machine EUROMIG plus 2040,5 - 8 mm 0,6 - 1,0 mm 14,8 - 24 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 100 A 15 - 200 A Show more
Specifications
Material thickness 0,5 - 8 mm steel / stainless steel wire diameter 0,6 - 1,0 mm welding voltage adjustment 14,8 - 24 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg duty cycle 100 A welding current setting 15 - 200 A welding current switching stages 10 Num. ground connection plug / cross-section 9 / 25 O / mm2 welding power source (10 min at 40 °C) at welding current 20 / 200 % / A holding capacity max 12 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 2 Rollers connector CEE 16 A Width 440 mm Depth 750 mm Height 640 mm Weight 70 kg € 1.558,80Special price because of Messe Highlights Schweissen & Intertool 2024 (until 30. June 2024)€ 1.558,80 Incl. Tax€ 1.299,00 Excl. TaxNormal-Price
Incl. Tax: € 1.902,00 -18%In stock, immediately available - SKU: 00553Emergency power complete package SEDSS 44WDE-ASS400 / 230/50 V/Hz 44 kVA 40 kVA 58 A 15.4 kVA 14 kVA 61 A Diesel Show more
Specifications
voltage frequency 400 / 230/50 V/Hz maximum power 3~400V 44 kVA continuous power 3~400V 40 kVA power 3~400V continuous 58 A maximum power 1~230V 15.4 kVA continuous power 1 ~ 230V 14 kVA Power 1 ~ 230V continuous 61 A fuel Diesel rotational 1500 rpm cooling water-cooled engine type Kubota V3800DIT emission level 3A engine power 42 kW capacity 3769 cm3 cylinder 4 tank capacity 90 l consumption at 75% load 7.7 l/h Running time per tank filling at 75% load 11.7 h dimensions lxbxh 2100x940x1120 mm weight (without fuel) 925 kg sound power complies with RL 2000/14/EG, 2005/88/EG 90 LWA sound pressure level in 7m 65 dB(A) Switching capacity automatic switchover 125 A € 40.938,00€ 40.938,00 Incl. Tax€ 34.115,00 Excl. TaxIn stock, immediately available - SKU: 16034KBM 32 SN SET action32 mm MK 4 80 - 1700 rpm 12 120 mm 92 mm 16 mm 520 mm Show more
Specifications
drilling capacity in steel 32 mm mandrel holding fixture (screw mandrel) MK 4 speed range 80 - 1700 rpm speed gradually 12 quill stroke 120 mm column diameter 92 mm t-slot width 16 mm drill table lift 520 mm mandrel radius 260 mm drill table swiveling ± 45 ° drill table revolving ± 180 ° quill distance table min./max. 165 - 700 mm drilling table surface 475x425 mm motor power 1100 W voltage 400/50 V/Hz cubature 475x425x700 mm base plate surface 550x570 mm height (total) 1710 mm Weight 134 kg € 1.584,00€ 1.584,00 Incl. Tax€ 1.320,00 Excl. TaxIn stock, immediately available - SKU: 54007Shielding gas welding system PROFI-MIG 3000 plus / MIG 2740,5 - 10 mm 0,6 - 1,2 mm 15,5 - 27,3 V 1,0 - 1,2 mm 200 / 300 mm 5/15 kg 30 / 265 A 10 Num. Show more
Specifications
Material thickness 0,5 - 10 mm steel / stainless steel wire diameter 0,6 - 1,2 mm welding voltage adjustment 15,5 - 27,3 V aluminium wire diameter 1,0 - 1,2 mm welding wire roll diameter 200 / 300 mm welding wire roll weight 5/15 kg welding current setting 30 / 265 A welding current switching stages 10 Num. ground connection plug / cross-section 13 / 35 O / mm2 welding power source (10 min. at 40 °C) at welding current 130 A welding power source (10 min at 40 °C) at welding current 20 / 265 % / A holding capacity max 19,1 A voltage / phases 400 / 3 V / ~ Mains frequency 50 Hz anti-surge fuse 16 AT Degree of protection (IP) 21 S feed drive 4 Rollers connector CEE 16 A Width 540 mm Depth 850 mm Height 780 mm Weight 80 kg € 2.074,80Special price because of Messe Highlights Schweissen & Intertool 2024 (until 30. June 2024)€ 2.074,80 Incl. Tax€ 1.729,00 Excl. TaxNormal-Price
Incl. Tax: € 2.628,00 -21%In stock, immediately available - SKU: 00778SEDSS 34WDE-AVR-DSE4520-V4 generator€ 34.038,00€ 34.038,00 Incl. Tax€ 28.365,00 Excl. TaxIn stock, immediately available
- SKU: 82007GBM 3/30 SNA gear column drill - set30 mm M22 MK 3 75 - 3010 rpm 8 150 mm 4 105 mm Show more
Specifications
drilling capacity in steel 30 mm thread cutting performance M22 mandrel holding fixture (screw mandrel) MK 3 speed range 75 - 3010 rpm speed gradually 8 quill stroke 150 mm quill feed levels 4 column diameter 105 mm t-slot width 14 mm drill head lift 270 mm drill table lift 500 mm mandrel radius 320 mm drill table revolving ± 180 ° drill head revolving ± 180 ° quill distance table min./max. 50 - 820 mm drilling table surface 500x350 mm motor power (2-stage) 900 / 1200 W voltage 400/50 V/Hz cubature 500x350x870 mm base plate surface 400x670 mm Weight 210 kg € 5.010,00Special price because of Jubiläums Highlights März - Juni 2024 (until 30. June 2024)€ 5.010,00 Incl. Tax€ 4.175,00 Excl. TaxNormal-Price
Incl. Tax: € 5.868,00 -15%In stock, immediately available - SKU: 88174Universal lathe INDUSTRIE 1500/230 HD1500 mm 230 mm 460 mm 290 mm 700 mm 340 mm 200 mm 280 mm Show more
Specifications
Tip width 1500 mm Tip height 230 mm turning diameter over bed 460 mm turning diameter over carriage 290 mm turning diameter without bridge 700 mm machine bed width 340 mm bridge length 200 mm cross slide way 280 mm top slide way 100 mm turning chisel cross-section, max. 25x25 mm rotating feed intake D1 - 8 mandrel holding fixture (screw mandrel) MK 7 mm spindle bore 80 mm rotational speed 25 - 1800 rpm speed gradually 12 longitudinal feed (170) 0.04 - 2.46 mm/rev cross feed rates (170) 0.02 - 1.23 mm/rev Thread size metric (M..) (24) 0.5 - 20 mm module thread metric (20) 0.25 - 10 mm inch thread, gears G (61) 1-5 / 8-72 G/' inch module thread, Gears G (45) 3-1 / 4-96 G/' lead screw gradient 6 mm lead screw diamteter 40 mm sleeve holding fixture MK 5 quill diameter 75 mm spindle stroke 130 mm motor power 5500 W coolant pump 40 W voltage 400/50 V/Hz length (total) 2810 mm height (total) 1295 mm Weight 2835 kg € 39.000,00Special price because of Trade News 2024 (until 31. December 2024)€ 39.000,00 Incl. Tax€ 32.500,00 Excl. TaxResidual amounts available
We stand for quality, reliability and stability - values that are in demand today more than ever.
FOCUSED
Powered by Quality
In the race for innovation, it sometimes happens that one loses sight of what and for whom one is looking for new solutions. The end result is the realisation that product development in itself is not a recipe for success.
It is much more important to keep your ear close to the needs and wishes of the customer. Only in this way can new developments and special solutions be created that really bring new advantages.
ELMAG works and develops based on this principle: always exactly according to the customer's wishes - and still with a wide standard range for trade, industry and crafts.
Only those who are prepared to go one step further reach the top. For this reason, the 2- or 3-year warranty and the 15-year spare parts guarantee are a matter of course at ELMAG.
MAIN PRINCIPLE
Powered by People
A large part of the ELMAG team has already completed their apprenticeship. This creates an invaluable advantage both for building up
expertise as well as for continuity in customer care. Only over the years can genuine trust and intensive partnership develop.
The human and professional appreciation of all employees is lived at ELMAG on a daily basis - and consistently. Respectful cooperation ensures a collegial, positive working atmosphere and more motivation at the workplace - for everyone. This is also felt by the customers.
POWERED BY QUALITY - POWERED BY PEOPLE. This guiding principle is a top priority for the entire ELMAG team.